Foshan Sunhope Co., Ltd.sales1@fs-sunhope.comWhatsApp +86 189 8867 9216WeChat shan285397003
Get a quote
Home/Production lines/Start a radiator plant

How to start a radiator plant, step by step

Most of our customers do not start with a full plant. Here are the four set-ups we supply, from one clinching machine to a plant for around 20,000 radiators a month, each with a real project behind it.

Short answer: you can start a radiator business in stages. The smallest step is assembling radiators from bought cores with a tank clinching machine and a leak tester. Next you make your own cores with a fin machine, core builders and a press. A full aluminium radiator line adds tube cutting and a nitrogen brazing furnace. A complete plant also makes its own header plates, side plates and flat tubes.

Stage 1

Assemble radiators from bought parts

Buy brazed cores, plastic tanks, gaskets and header plates, and close the radiators in your own workshop. This is the smallest way to start, and it lets you learn the market before you invest in core production.

Machines

From our projects

Pakistan A radiator workshop replaced manual tank assembly with our semi-automatic clinching machine. It has been running in production since installation.

Pakistan Another customer ordered a fin machine together with header plates and plastic radiator tanks, packed and shipped in one consignment.

Stage 2

Make your own cores

Form your own fins, stamp header plates and assemble the cores yourself. You control core quality and can offer more models. The cores still need brazing, in your own furnace (stage 3) or with a brazing partner.

Machines

From our projects

Egypt A radiator manufacturer ordered two core assembly machines, a fin machine and a press. Everything passed factory inspection in Foshan before it was packed and shipped.

Stage 3

Run a full aluminium radiator line

Add tube cutting and a nitrogen brazing furnace, and the whole core is made and brazed under your roof. Together with clinching and leak testing, this is a complete line for aluminium radiators.

Machines

From our projects

Sri Lanka A radiator manufacturer upgrading its plant ordered a fin machine, tube cutting machine, core assembly machine and brazing furnace. Our team assembled, wired and calibrated the four machines on site, trained the operators and supported the first production batch.

Stage 4

Build a complete radiator plant

Make every part yourself: header plates, side plates, flat tubes and fins, then assemble, braze, clinch, test and pack. Our standard configuration is sized for around 20,000 car and truck radiators a month.

  • Header plates200 t pneumatic press × 1, 110 t pneumatic press × 2, Header and side plate dies × 10
  • Side platesSide plate roll forming machine × 1, 60 t pneumatic press × 1, Fibre laser cutting machine × 1
  • Flat tubesHigh-frequency welded flat tube line × 1
  • FinsFin forming machine × 3
  • CleaningUltrasonic cleaning line × 1
  • AssemblySemi-automatic core builder × 4
  • BrazingContinuous nitrogen brazing furnace × 1
  • ClinchingSemi-automatic tank clinching machine × 2, Automatic 4-side clinching machine × 2
  • TestingAir leak tester × 2
  • PackingRadiator vacuum packaging machine × 1
  • AirVariable-speed screw compressor, 37 kW × 1, All-in-one screw compressor, 15 kW × 1

See every station of the radiator plant or configure it online.

What happens after you order

The same steps as in our projects abroad.

  1. Plan

    Send your radiator types or drawings, target output and which parts you want to make. We propose the machines, quantities and layout.

  2. Build and inspect

    Machines are built, tested and inspected in Foshan. You or your agent can attend the inspection.

  3. Ship

    Machines and parts are packed for export and shipped together.

  4. Install and commission

    Our engineers assemble, wire and calibrate the machines at your plant and synchronise the line.

  5. Train

    Your operators learn machine operation, daily maintenance and basic troubleshooting.

  6. First batch

    We support your first production batch to check product quality and line stability.

Prepare at your site

Usually bought locally. We can quote them on request.

  • Nitrogen tank, 10 m³For the brazing furnace
  • Nitrogen vaporizerFor the brazing furnace
  • Press brakeBending steel side plates
  • Welding machineWelding nuts to steel side plates
  • Welding robotWelding tanks of all-aluminium radiators
  • Carton strapping machinePacking finished radiators
  • Power cablesFrom the main supply to the furnace control cabinet and presses
  • Air pipingFrom the compressors to every machine
  • Water pipingTo the furnace control cabinet
  • Exhaust flueVenting the brazing furnace outside

Questions about starting a radiator plant

What is the smallest way to start making radiators?

Assemble radiators from bought brazed cores, plastic tanks and gaskets with a tank clinching machine and a leak tester. A radiator workshop in Pakistan started this way with our semi-automatic clinching machine.

Do I have to make tubes, fins and header plates myself?

No. Many plants buy tubes, header plates and tanks at first and add their own part lines later. We supply both the machines and the parts, so you can move one step at a time.

How many radiators can a complete plant make?

Our standard configuration is sized for around 20,000 car and truck radiators a month. We size each line to your models and target output.

Do you install the line and train our operators?

Yes. In Sri Lanka our team assembled, wired and calibrated the machines on site, trained the operators in operation, daily maintenance and basic troubleshooting, and supported the first production batch.

Can I inspect the machines before they ship?

Yes. Machines are tested and inspected in Foshan before shipping, and you or your agent are welcome to attend, as our Egyptian customer did.

What do I need to prepare at my site?

Power cables to the furnace control cabinet and presses, compressed-air and water piping, an exhaust flue for the brazing furnace, and a nitrogen tank with a vaporiser. These are usually bought locally; we can quote them on request.

What warranty and payment terms do you offer?

Our machines carry a 12-month warranty on parts and workmanship. We accept T/T or L/C, agreed with each quotation.

Plan your plant with us

Pick the machines for each step online, then send the list to our engineers.

Open the line builder →